Momental homeMomental
All Resources
Article

Colors of Noise for Sleep: White, Pink, Brown and More

·3 min read

White, pink and brown noise explained in plain words, plus green, grey, blue, violet and black noise, and how to pick the one that helps you sleep.

"Colored" noise is a steady sound that contains a wide range of frequencies. The color says how the energy is spread between low and high pitches. That balance changes how the noise sounds and how easy it is to listen to all night.

You can hear each one in the colored noise generator while you read.

White noise

White noise has equal energy at every frequency. Because our ears hear more detail in the high range, it sounds bright and hissy, like TV static or a hard-blowing air vent. It is good at covering sharp, high sounds such as voices or a door, but many people find it harsh over a whole night.

Pink noise

Pink noise drops in volume as the pitch rises, about 3 dB per octave. The result sounds more balanced and softer than white noise, like steady rain or wind through trees. It is a common middle ground for sleep.

Brown noise

Brown noise (also called red or Brownian noise) drops off faster, about 6 dB per octave, so most of its energy is low. It sounds deep and rumbly, like a distant waterfall, heavy rain on a roof or the inside of a plane. Many people who find white noise too sharp prefer brown noise. It is also good at blending in low sounds like traffic or footsteps from upstairs.

The other colors

  • Green noise is a name used for noise centred on the middle frequencies. It sounds like a calm, open outdoor hum. It has no strict technical definition.
  • Grey noise is shaped so that every frequency sounds equally loud to human ears. It is softer in the mid range than white noise.
  • Blue and violet noise lean towards the high end. They sound thin and hissy and are rarely used for sleep.
  • Black noise usually means silence, or near silence with a few random sounds. If you are searching for black noise for sleep, you are probably looking for a very dark, quiet room.

Is a fan white noise?

Not exactly. A fan makes a broadband sound, but most of its energy is in the low and middle range, so it is closer to brown or pink noise. That is why many people find a fan more pleasant than true white noise.

Which noise color is best for sleep?

There is no single best color. Try this:

  1. Start with brown noise if outside noise is low-pitched (traffic, neighbours, a partner's snoring) or if white noise feels tiring.
  2. Try pink noise if brown sounds too muffled.
  3. Use white noise if you mainly need to cover voices or sharp sounds.
  4. Layer sounds. A little white on top of brown, or rain over pink noise, can cover more kinds of noise at a lower volume. The sound mixer lets you try this in your browser.

Keep the volume low: just loud enough to blend in the sounds that bother you, never so loud you would raise your voice over it. For children, keep the speaker away from the bed and the volume lower still.

App StoreGoogle Play